Press the RESET button and wait for 30 seconds. If this doesn’t resolve the issue, contact our support team on 01621 778 887

Yes, just press BYPASS on the Water Control Switch. You can then run water for up to 1 hour (+ your flow settings i.e. 20 minutes).

If you wanted a specific amount of time you can adjust the amount of time to suit your needs. Instructions can be found on the Adjust Flow Time Page

Please note: if there is a leak then the device will keep running for this length of time.

If you haven’t used any water for 24hrs it will automatically turn off the water supply where your Floodcheck is fitted.
On your return press the RESET button and wait 30 seconds.

The Floodcheck® Auto and all of its components are warranted against any defect in manufacture for a period of 24 months from the date of purchase. Proof of purchase is required.

Whilst there is a possibility a small reduction in the flow, this is typically less than 4% and will not be noticeable.

Yes you can, these can be in a daisy chain order.

Although the Floodcheck virtually needs no maintenance. we do advice to test once a year or test monthly for ones peace of mind.

Please Note: The warranty is limited to the cost of a replacement Floodcheck® Auto and its components as purchased.

Faulty units need to be returned to the supplier.